11
TROUBLESHOOTING
If CAIA does not appear to be operating as expected, perform a short press and check the
response as below:
No response
Flat battery or
internal fault
Place CAIA so the mirror is in direct
sunlight (PV
cell is at the top of the mirror)
If no change after a long time in the sun (a
day?),
perform a very long press (more than 10
seconds) to reset CAIA, and then check
short
press response. If CAIA continues not to
respond
then an internal fault is likely.
2 short beeps
Battery is low
Place CAIA so the mirror is in direct
sunlight (PV cell is at the top of the
mirror)
CAIA starts
scanning
CAIA was in sleep
mode or waiting for
the sun to come
back
Wait for CAIA to find sun
CAIA emits 5 long
beeps
CAIA movement
has been
obstructed
Check for any obstructions, then perform
a long
press. A further short press should then
trigger
scan to start
CAIA emits SOS
signal
CAIA has detected
a possible fault
Perform a long press to reset CAIA. A
further short
press should then trigger scan to start.
If a further SOS signal is heard then an
internal
fault has occurred
