5
5. HANDLING
The CAD COMPACT ECOWATT units are delivered fi xed with screws to the pallets.
The handling machines will be adapted to the load and the lifting conditions. In all cases, the lifting will
be done at the device’s base. The centre of gravity is located at the centre of the unit. The device must be
carefully manipulated only in the horizontal position.
6. INSTALLATION
6.1. INTRODUCTION
All models are designed to be installed hanging from the ceiling or located behind a false ceiling.
When installing the unit, is necessary to distribute the unit weigh between the 4 supports existing in the
units.
Using studded rods (Ø 8 mm), it can be secured to the ceiling and levelled:
Check the distances between supports in the diagrams of the section: “Dimensions and free dimensions
for maintenance”.
The installer must make sure that the ceiling structure and the securing elements can bear the weight
of the device, taking into account that it is a dynamic load.
