10
11
Block Programming:
When programming “ON/OFF” events, all days are indicated
by default. To change the day selection; simply keep pressing the “Day” key and the
display will change as follows: Individual Day (MON, TUE, etc.); MON~FRI; SAT~SUN;
MON~SAT; MON~SUN; MON-WEDFRI; TUE-THU-SAT; MON-WED; THU-SAT. Follow the
steps above to complete programming.
Reviewing Programs:
To review entered programs; simply press and release the
“PROG” key. Each time you do this you will be able to scroll thru the programs. Any
program can be edited simply by pressing the HOUR, MIN, and DAY keys. Then press
the PROG key in order to accept the changes. When complete press the “CLOCK” key to
return to current time and day.
MEMORY BACKUP:
The FT247 is equipped with a rechargeable Ni-Mh battery which will
protect your programs during power failure for up to 30 days. No need to replace battery.
Note that the screen blanks during a power failure.
Deleting Programs:
To delete a particular program press the PROG key until the desired
program is displayed. Then press the HOUR and MIN keys until - - : - - is displayed. Then
press the PROG key in order to delete the program. When complete press the “Clock” key
to return to current time and day. Manual Override: Pressing the FT247 cover while closed
will alternate the unit ON or OFF.
Disable Function:
The FT247 has a disable function whereby the programs do not
execute. It’s ideal during Holidays of vacation period where the unit is not to perform any
function. Simply slide bottom slide switch of OFF.
Initial Startup:
When you initially program the unit it may be necessary to press the
manual override key as the unit will not look back to determine if it should be ON.
Example: the current time is 2:00PM and you just programmed the unit to turn “ON” at
1:00PM, press the manual override key to turn the unit “ON”. Thereafter, the unit will
resume normal automatic operation.
