5
To ensure quiet operation of ENERGY STAR qualified inline and remote fans,
each fan shall be installed using sound attenuation techniques appropriate for the
installation. For bathroom and general ventilation applications, at least 8 feet of
insulated flexible duct shall be installed between the exhaust or supply grille(s) and
the fan. For remote ventilation applications, where metal duct is generally required by
code, a metal sound attenuator shall be installed between the hood and the fan.
ELECTRICAL CONNECTION
All TD - MIXVENT series fans operate from a standard 120V 60Hz A.C electrical
supply. All wiring must be carried out in accordance with National Electrical Code and
all applicable state and local buildings codes.
Electrical connections should be made in accordance with the following diagrams:
Figure (3)
Electrical Wiring.
MAINTENANCE
IMPORTANT: BEFORE CARRYING OUT ANY MAINTENANCE OR SERVICING,
ENSURE THE UNIT IS DISCONNECTED FROM THE MAIN ELECTRICAL SUPPLY.
All TD - MIXVENT series exhaust fans incorporate sealed for life bearings and
therefore do not require any lubrication. We would recommend inspection of the
product at least once every twelve (12) months to avoid the excessive accumulation
of dust and dirt on the impeller. To inspect the unit disconnect from electrical supply
and remove from ducting. If any debris is evident on the impeller clean with a damp
(not wet) cloth. DO NOT USE any detergents or abrasive materials for cleaning.
WARRANTY
S&P USA - S&P Canada warrant that the TD - MIXVENT series exhaust fan will be
free from defective materials and workmanship for the period of (5) years from the
date of original purchase. In the event that we find any part is defective the product
will be repaired or, in the Company’s discretion, replaced without charge provided
that the product has been installed in accordance with the enclosed instructions and
all applicable EPA Standards and state and local building codes. S&P TD Bath Kits
have an extended warranty period of (7) years from the date of original purchase.
IF CLAIMING UNDER WARRANTY
Please return the complete product, freight paid, to you local authorized distributor.
All returns must be accompanied by a valid Bill Of Sale. All returns must be clearly
marked “Warranty Claim,” with an accompanying description stating the nature of the
fault.
THE FOLLOWING WARRANTIES DO NO APPLY
Damages from shipping, either concealed or visible. Claim must be filed with the
carrier.
Damages resulting from improper wiring or installation
Damages caused by acts of nature, or resulting from improper consumer procedures
such as: Improper Maintenance; Misuse; Negligence; Alteration; Abuse; Abnormal
Use; or Accident or Incorrect Electrical Voltage and Current.
Removal or alteration to the S&P USA - S&P Canada data plate label.
