Problem
Possible Causes
Solutions
Water on the floor
Drain Tube is not connected.
Install the Drain Tube onto the Drain Port on the back of the
unit. See the
PRODUCT SETUP
Section on
Page 6.
Drain Tube connection may be
loose.
Check the Drain Tube connection. See the
PRODUCT SET-
UP
Section on
Page 6.
Unit will not turn on
The fuse is blown / circuit break-
er is tripped.
Check the house fuse / circuit breaker box and replace fuse or
reset breaker.
Unit is on, but fan is not
running
Dehumidifier has reached the
humidity level set on the control
panel.
The dehumidifier automatically turns off when the set humid-
ity level is met. To continue operation, reduce humidity set-
ting or activate Continuous Mode.
Power Failure.
There is a protective time delay (up to 3 min.) to prevent trip-
ping of the compressor overload. For this reason, the unit may
not start normal dehumidification for 3 min. after it is pow-
ered back on.
TROUBLESHOOTING
For any questions or Technical Support,
please call
customer service
877
-
665
-
9765
Summary of Contents for DMG-135-60
Page 1: ...V 170405 Model Number DMG 135 60 5008441...
Page 15: ......