Soleus Air DMG-135-60, Operating Instructions Manual

CONTROL PANEL OPERATION 

Set Timer

Auto On

-

To program the unit to automatically turn on, press the 

TIME 

button repeatedly until Timer function 

is displayed while the unit is off. Press + or 

-

 to increase or decrease the timer in 1 hour increments until the 

desired time increment is displayed. After 5 seconds, the displayed time increment will flash, indicating that it 
has been set. Once the set time increment is reached, the unit will automatically turn on. 

Auto Shut

-

Off

-

To program the unit to automatically turn off, press the 

TIME 

button repeatedly until Timer 

function is displayed while the unit is on. Press + or 

-

 to increase or decrease the timer in 1 hour increments 

until the desired time increment is displayed. After 5 seconds, the displayed time increment will flash, indicat-
ing that it has been set. Once the set time increment is reached, the unit will automatically turn off. 

7)     

SD Card Recording 

-

 Insert an SD Card into the SD Card Slot with the product label on the SD Card 

facing down. When an SD Card is inserted and the unit is powered on, the unit will automatically record the 
Date, Time, Temperature, Relative Humidity, Total Operating Time, and Electricity Consumption once every 
hour. 

PRODUCT USE AND OPERATION

1)

SD Card Report Viewing

-

 Place the SD Card into the SD Card Slot on a computer. Open the SD Card 

folder to view all stored reports. Click on the file and open to view. 

2) 

Automatic Draining

-

 The dehumidifier will automatically drain when the internal tank is full during nor-

mal operation. Be sure that the Drain Tube is installed or collect bucket is placed below the Drain Port at all 
time during operation. (See page 6 for Drain Tube installation instructions)

OPERATING INSTRUCTIONS