CONTROL PANEL OPERATING INSTRUCTIONS
1)
When first operating the dehumidifier, run it in Continuous mode for 24 hours.
2)
Power On and Off
-
Press the
POWER
button once to manually turn the unit on. Press the
POWER
but-
ton once more to turn the unit off.
3)
Humidity Selection
-
Press the
or
buttons to
choose the desired relative humidity in the room. Each
press of the button will change the desired room humidity by 5%. The room humidity is selectable from
35%
-
80% or continuous. The unit will cycle on and off to maintain the humidity level chosen on the digital
display. If you want the dehumidifier to operate continuously regardless of the room humidity, press the
MODE button until you see “
CO
” on the digital display. This will enable
continuous operation
and the
“
Continuous
” indicator will light up on the control panel.
4)
Fan Speed Control
-
Press the
FAN SPEED
button to cycle through the different fan speeds:
Quiet
,
High
and Low
. The fan speed can be visually distinguished by the fan speed indicators on the control pan-
el. For fast dehumidification, choose High. For moderate dehumidification, choose Low. For quiet opera-
tion, choose Quiet.
5)
Timer Auto On
-
To program the unit to automatically turn on, press the
TIMER
button when the unit is
off. Press
or to increase or decrease the timer in 30 min increments (.5 hours) up to 10 hours. After
10 hours, each press of the
or
buttons will increase the timer in 1 hour increments up to 24 hours.
Once the desired time is reached, the unit will automatically turn on.
Timer Auto Shut
-
Off
-
To program the unit to automatically turn off, press the
TIMER
button when the
unit is on. Each press of the or
buttons will change the timer setting in 30 min increments ( .5 hours)
up to 10 hours. After 10 hours, each press of the or
buttons will increase or decrease the timer in 1
hour increments up to 24 hours. Once the desired time is over, the unit will automatically power off.
6)
MyHome Modes
-
Preset humidity level settings allow the user to easily move the dehumidifier room
-
to
-
room and select the corresponding mode for the location in which the dehumidifier is operating for opti-
mum performance. Press the
MODE
button to choose from Sleeping Space (55%), Living Space (50%) or
Basement (45%).
7)
Child
-
Lock Mode
-
To lock the control panel, press and hold the
TIMER
button for 3 seconds. Locking
the control panel prevents someone from accidentally changing the settings. When locked, the
LOCK
indicator will light up. Press and hold the
TIMER
button for 3 seconds to unlock the control panel.
8)
Mirage Display
– Backlit display on the front of the dehumidifier that shows the actual humidity level in
the room to be easily seen from across the room. Press the
MIRAGE
button to turn the Mirage Display on
and once again to turn the Mirage Display off.
NOTE: Fan will continue to run even when the compressor is off. This is normal and allows the unit to
circulate air and operate more efficiently.
OPERATING INSTRUCTIONS
Dehumidifier must be upright for 24 hours prior to operating.
This ensures that the compressor will function as intended.