OPERATING INSTRUCTIONS
CONTROL PANEL OPERATING INSTRUCTIONS
1)
When first operating the dehumidifier, run it in Continuous mode for 24 hours.
2)
Power On and Off
-
Press the
POWER
button once to manually turn the unit on. Press the
POWER
button once more to turn the unit off.
3)
Humidity Selection
-
Press the
or
buttons to
choose the desired relative humidity in the room.
Each press of the button will change the desired room humidity by 5%. The room humidity is selectable
from 35%
-
80% or continuous. The unit will cycle on and off to maintain the humidity level chosen on
the digital display. If you want the dehumidifier to operate continuously regardless of the room humidi-
ty, press the MODE button until you see
“
CO
”
on the digital display. This will enable
continuous oper-
ation
and the
“
Continuous
”
indicator will light up on the control panel.
4)
Fan Speed Control
-
Press the
FAN SPEED
Button to cycle through the different fan speeds:
Quiet
,
High and Low
. The fan speed can be visually distinguished by the fan speed indicators on the control
panel. For fast dehumidification, choose High. For moderate dehumidification, choose Low. For quiet
operation, choose Quiet.
5)
Timer Auto On
-
To program the unit to automatically turn on, press the
TIMER
button when the unit
is off. Press
or to increase or decrease the timer in 30 min increments (.5 hours) up to 10 hours.
After 10 hours, each press of the
button will increase the timer in 1 hour increments up to 24 hours.
Once the desired time is reached, the unit will automatically turn on.
Timer Auto Shut
-
Off
-
To program the unit to automatically turn off, press the
TIMER
button when the
unit is on. Each press of the
or buttons will change the timer setting in 30 min increments (.5
hours) up to 10 hours. After 10 hours, each press of the
or buttons will increase or decrease the
timer in 1 hour increments up to 24 hours. Once the desired time is over, the unit will automatically
power off.
6)
MyHome Modes
-
Preset humidity level settings allow the user to easily move the dehumidifier room
-
to
-
room and select the corresponding mode for the location in which the dehumidifier is operating for op-
timum performance. Press the
MODE
button to choose from Sleeping Space (55%), Living Space
(50%) or Basement (45%).
7)
Child
-
Lock Mode
-
To lock the control panel, press and hold the TIMER button for 3 seconds. Lock-
ing the control panel prevents someone from accidentally changing the settings. When locked, the
LOCK Indicator
will light up. Press and hold the TIMER button for 3 seconds to unlock the control
panel.
8)
Mirage Display
–
Backlit display on the front of the dehumidifier that shows the actual humidity level
in the room to be easily seen from across the room. Press the
MIRAGE
button to turn the Mirage Dis-
play on and once again to turn the Mirage Display off.
NOTE: Fan will continue to run even when the compressor is off. This is normal and allows the unit
to circulate air and operate more efficiently
Dehumidifier must be upright for 24 hours prior to operating.
This ensures that the compressor will function as intended.
