14. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet.
15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, DO NOT unplug by
pulling on the cord.
16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use.
17. Use only for intended household use as described in this manual. Any other use not recommended by the manufacturer
may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by unauthorized
dealers may cause hazards.
18. Always use on a dry, level surface. Use on floor only.
19. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state speed control de-
vice.
20. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your war-
ranty. The inside of the unit contains no user serviceable parts. Qualified personnel should perform all servicing only.
21. Connect to properly grounded outlets only.
22. SAVE THESE INSTRUCTIONS.
WARNING
: This heater has a voltage rating of 120
volts. The cord has a plug as shown in A. An adapter as
shown in C is available for connecting three-blade
grounding-type plugs to two-slot receptacles. The
grounding lug extending from the adapter must be con-
nected to a permanent ground such as a properly
grounded outlet box. The adapter should not be used if
a three-slot grounded receptacle is available.
DO NOT DEFEAT THE SAFETY PURPOSE OF
THE GROUNDED PLUG.
SPECIFICATIONS
Voltage Rating
120 V (60Hz)
Power Consumption
700/800/1500W
Unit Size
24 in. (W) x 24
in. (D) x 81 in. (H)
Unit Weight
30 lbs
Voltage Rating
120 V (60Hz)
Power Consumption
700/800/1500W
Unit Size
24 in. (W) x 24
in. (D) x 81 in. (H)
Unit Weight
30 lbs
3
Summary of Contents for HP1-15-50
Page 4: ...PRODUCT DIAGRAM 4...
