Soleus Air HP1-15-50, Operating Instructions Manual

BASIC ASSEMBLY 

 
To properly assemble this heater you need the supplied assembly wrench and Allen wrench (or one of your 
own). Refer to the parts diagram on page 5 while assembling the heater. 
 
1)  First, attach the base pole (F) to the weighted base (B) using the 3 base bolts (H). Once you secure the 

base pole to the weighted base (B), remove the  middle pole (E)  and height adjuster from the bottom pole 

(pull and turn the height adjuster clockwise). Place the decorative cone (C) over the base pole (F) to cover 

the bolts on the base and reattach the middle pole and height adjuster. 

2)  Next, place the power cord attached to the heater head (A) through the middle of the top pole (D). The top 

pole (D) will have two smaller screw holes located at the top. Align the small screw holes with the holes 

on the bottom of the heater head. Use the small heater head connector screws (G) to secure the heater head 

(A) to the top pole (D). 

3)  Now, find the middle pole (E) and place the power cord through the middle of the pole, bottom pole, and 

weighted base. Screw the top of the middle pole (E) into the bottom of the top pole (D).  

 6