6
2. REQUIREMENTS FOR HOB INSTALLATION
All activities related to hob installation and connection to gas and electrical system
should be performed by a certified installer.
NOTE:
Before installing the hob and connecting it to the gas installation, make sure it is adapted
for the right type of gas supply and that this gas corresponds to the gas type given on the
hobs’s rating plate. (by default, cookers are adapted to G 20 gas). Otherwise, adapt the hob
through replacing the nozzles and air diaphragms with the types appropriate for the given
type of gas.
In case of any doubt as to the type of gas supplied via the network, please contact your gas
supplier.
Proceeding in such case is described in details under 5.2 of the instruction.
2.1. Requirements for rooms
The rooms designated for installing the cooker should be dry and airy, with efficient natural
ventilation.
2.2. Installation and assembly in furniture
All activities related to the assembly and connection of the stove to the gas and electric
systems must be performed by an authorized installation technician.
Assembly of the hob in kitchen countertops
Due to the large size of the hob it is not recommended to install it in the countertops of individual
kitchen cabinets. A composite kitchen countertop where the gas hob is to be installed must be
permanently fixed to the cabinets or permanently connected with other elements of the furniture. In
order to place the hob in the kitchen countertop or in a composite countertop, it is necessary to
make an opening in it with the following dimensions, depending on the type of the hob
540x310
mm. If the hob is to be installed over an oven, the opening where the hob is to be installed must be
symmetric.
If the hob is to be placed next to cabinets standing on the countertop or in the corner of the room,
the plate of the gas hob must be placed at least 150 mm away from the side of the cabinet or wall.
The way to install and fix a 2-burner hob is presented
in the drawing
.
