DMX BOSS
W
i-F
i C
on
tr
oller
Page 5
PRODUCT MANUAL
DMX BOSS Wi-Fi Controller
Toll Free: 866.592.3873
Email: sales@solidapollo.com
www.SolidApollo.com
Positive (+)
Negative (-)
RJ45
12V Power
Supply
-
-
-
-
DMX to RGBW
Controller
Channels
1,2,3,4
DMX to RGBW Controller
SKU: SA-CTRL-001-V2
(please refer to the
matching manual for
installation details)
DMX Boss Wi-Fi Controller
Using the RJ-45 Output
+
-
-
-
-
-
+
-
D1+
R
G
B
W
D1-
D2+
D2-
+
+
+
+
Ground (-)
Split Da
ta
W
ire A
par
t f
or 3 C
onnec
tions
Ground (-)
Data (+)
Data (-)
Data (+)
Data (-)
-
-
-
-
DMX to RGBW
Controller
Channels
9,10,11,12
+
-
+
-
D1+
R
G
B
W
D1-
D2+
D2-
+
+
+
+
-
-
-
-
-
-
-
-
DMX to RGBW
Controller
Channels
5,6,7,8
+
-
+
-
D1+
R
G
B
W
D1-
D2+
D2-
+
+
+
+
-
-
-
-
4 Channel
RGBW
Fixture
W-
+
G-
R-
B-
4 Channel
RGBW
Fixture
W-
+
G-
R-
B-
4 Channel
RGBW
Fixture
W-
+
G-
R-
B-
Using the RJ45 Output:
for 4 Channel Lighting Fixtures such as LED Light Strips
2
The data port plug can be used on the left side of the DMX Boss to connect directly to DMX controlled lights or can
be used with RGB-W lights using a receiver to convert DMX signals to 4 channel RGB-W signals. To connect directly
to DMX controlled lights, plug in the data cable into the DMX Boss and then plug into the DMX controlled lighting
fixtures in a row. On each lighting zone, set the channel for that zone (refer to the user manual for the products
used for the correct channel numbers). The DMX Boss comes ready to use without pairing or programming as each
of the 8 zone buttons are pre-programmed to recognize each zone (button 1 uses the first 4 channels, 1-4, button
2 uses the next set , 5-8, and so on). When connecting to RGB-W 4 channel lights, a receiver is required to convert
DMX signals to 4 channel RGB-W signals (sold separately), and one receiver is required for each zone. To connect
the receiver, please refer to the manual listed on the webpage for the 4 Channel DMX-RGB-W LED Controller.
...continued on next page