T
HERMO
R
ACK
800
T
HERMOELECTRIC
C
HILLER
52-13007-1
S
OLID
S
TATE
C
OOLING
S
YSTEMS
,
167
M
YERS
C
ORNERS
R
OAD
,
W
APPINGERS
F
ALLS
,
NY
12590
30
T
ELEPHONE
:
(845)
296-1300
F
AX
:
(845)
296-1303
WEB
:
WWW
.
SSCOOLING
.
COM
V
ERSION
M8
Engineering Measures
Ensure adequate ventilation, especially in confined areas. Ensure that
eyewash stations and safety showers are close to the workstation location.
Personal Protective Equipment
Eye/face Protection
Wear appropriate protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection regulations in 29 CFR
1910.133 or European Standard EN166.
Skin and body protection
Wear appropriate protective gloves and clothing to prevent skin exposure.
Respiratory Protection
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or European Standard
EN 149 approved respirator if exposure limits are exceeded or if irritation or
other symptoms are experienced.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice.
9. Physical and chemical properties
Physical State
Viscous liquid Liquid
Appearance
Colorless
Odor
Odorless
Odor Threshold
No information available
pH
5.5-7.5 50% aq. sol
Melting Point/Range
-13 °C / 8.6 °F
Boiling Point/Range
196 - 198 °C / 384.8 - 388.4 °F @ 760 mmHg
Flash Point
111 °C / 231.8 °F
Method -
DIN 51758
Evaporation Rate
No information available
Flammability (solid,gas)
Not applicable
Flammability or explosive limits
Upper
15.30 vol %
Lower
3.20 vol %
Vapor Pressure
0.12 mmHg @ 20 °C
Vapor Density
2.14 (Air = 1.0)
Specific Gravity
1.113
Solubility
miscible
Partition coefficient; n-octanol/water
No data available
Autoignition Temperature
413 °C / 775.4 °F
Decomposition Temperature
> 500°C
Viscosity
21 cP (20°C)
Molecular Formula
C2 H6 O2
Molecular Weight
62.06
10. Stability and reactivity
Reactive Hazard
None known, based on information available
Stability
Hygroscopic.
Conditions to Avoid
Incompatible products. Excess heat. Exposure to moist air or water.
Incompatible Materials
Strong oxidizing agents, Strong acids, Strong bases, Aldehydes
Hazardous Decomposition Products
Carbon monoxide (CO), Carbon dioxide (CO2)
Hazardous Polymerization
Hazardous polymerization does not occur.
Hazardous Reactions
None under normal processing.