Soundscape Mixpander
Page 52 of 59
Click the Input tab (if needed) and right-click in the window to create the required number of
stereo input buses. Then click the Output tab and right-click in the window to create the required
number of stereo output buses. You should see the Soundscape streams appear incrementally in
the “ASIO Device Port” column as you create input and output buses:
NOTE:
If
needed,
you
can
change
an
“ASIO
Device
Port”
by
clicking
its
name
in
the
column
to
the
right
and
selecting
another
input
or
output
stream
in
the
menu
that
will
be
displayed.
7.
Make sure the top part of the Cubase Mixer (Input/Output Settings) is displayed. If it is not, click
the corresponding button, located to the left of the Mixer, so that it is displayed:
NOTE:
The
Cubase
Mixer
is
divided
vertically
in
three
segments.
The
audio
track
channel
inputs
and
outputs
are
shown
in
the
top
segment,
which
is
displayed
when
the
top
segment
of
the
button
is
lit.
