GENESIS
TM
DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary.
Page 7
Safety & Certification Notice
“Only qualified personnel are allowed to handle this unit. Read carefully and understand all the
warning labels
attached in this user manual”
Any personnel involved in installation, operation or service of the SOLiD repeaters must
understand and comply the following:
Understand all general and regional installation and safety regulations relating to work on high
voltage installations, as well as regulations covering correct use of tools and personal protective
equipment.
The power supply unit in repeaters contains dangerous voltage level, which can cause electric
shock. Switch the mains off prior to any work in such a repeater. Any local regulations are to be
followed when servicing repeaters.
The repeater cover should be (door) securely fastened in open position, e.g. by tying it up, at
outdoor work in order to prevent door from slamming due to wind causing bodily harm or
damage.
Use this unit only for the purpose specified by the manufacturer. Do not carry out any
modifications or fit any spare parts which are not sold or recommended by the manufacturer.
This could cause fires, electric shock or other injuries.
Any repeater, including this repeater, will generate radio signals and thereby give rise to
electromagnetic fields that may be hazardous to the health of any person who is extensively
exposed to the signals at the immediate proximity of the repeater and the repeater antennas.
Due to power dissipation, repeater may reach a very high temperature. Do not operate this unit
on or close to flammable materials.
Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or
abrasives.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
This power of this system shall be supplied through wiring installed in a normal building. If
powered directly from the mains distribution system, it shall be used additional protection, such
as overvoltage protection device.
Round terminals located on the rear of a 1.0mm2 (16AWG) or more wires using permanently
connected to earth.
W
ARNING
This is a class A product. In domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
Home/ personal use are prohibited.
