GENESIS
TM
DAS Operation Manual - Version 0.0 – Jan. 2019
©2019 SOLiD, Inc. All Rights Reserved. Confidential & Proprietary.
Page 28
System Operation
LRN consists of digital board and RF module. Based on components, all parameters are displayed.
LRN
P
ARAMETERS
LRN Digital board receives optical data from HOU over optical cable. And then convert into RF signal.
System information shows a lot of CPU firmware version, temperature, serial number, and so on.
①
Actual delay value between HOU and LRN
②
Delay value to be compensated as target delay
③
Target delay
LPMU is installed at the LRN. Its LPMU can be hot pluggable. Whenever LPMU installed, LRN system
detect that LPMU type and can set up the parameters of LPMUs.