16
Motor Antenna
1
Motor Type: DiSEqC1.2/USALS
2
Motor Setting:
If you select
“DiSEqC1.2”, “Local Longitude /
Local Latitude
” is not available. It will show the
screen like below:
When the highlight on the mode item
，
You can
use [Volume Up/ Volume Down] key to set
Motor function
Automatic SAT Scan
you can find sub-menus for Satellite,
Transponder, Polarity, NIT, program ,Scan mode
，
scan select
，
Signal Quality Bar and etc. And press
GREEN key to start channel search
1
、
Satellite: Select the satellite what you want to search the channel
2
、
Transponder: Select the desired TP (transponder).
3
、
NIT
：
scan by nit search mode
4
、
Program
：
scan by all/free only
5
、
Scan mode
：
default
、
one TP
、
blind scan
6
、
Scan select
：
single sat
、
all sat
7
、
Signal Intensive / Quality Bar: They show the strength and quality of signal from LNB.
Manual Scan
You can find sub-menus for Satellite,
Transponder, Polarity, NIT, program, Signal
Quality Bar and etc. and press Green key to start
channel search by current parameters
1.
Satellite: Select the satellite what you want
to search the channel
2.
Transponder: Select the desired TP
(transponder).
3.
Polarity: You can choose the polarity of
satellite signal among Auto / H (horizontal)
/ V (vertical).
4.
NIT
：
scan by nit search mode
5.
Program
：
scan by all/free only
6.
Signal Intensive / Quality Bar : They show the strength and quality of signal from LNB.
