background image

3

 Available  immediately   

 1– 5  years  guarantee   

 Cash  &  carry  discount  of  5%   

 Free  shipping (Germany) 

FOREWORD

Congratulations on the purchase of your new electric forklift HE1200/3, this easy to use forklift is made of high quality 

materials, specially designed for long lasting and reliable operation. For your own safety and for the correct operation of the 

truck, please read and follow these operating instructions before using the truck. It is best to keep this operating manual in 

a safe place. Check the truck for transport damage. Damaged electric forklifts must not be used. 

The stacker is used to electrically raise and lower the transport load to the desired height. Improper handling can result in 

injuries or damage to the machine. The operator/user must ensure correct use, ensuring that the electric lift truck is only 

used by trained and authorised persons.

SAFETY INSTRUCTIONS

• Read the warning signs on the truck and the instructions in this manual before use.

• Do not operate the truck unless you are familiar with it and trained to do so.

• Do not use the truck unless you have checked that it is in perfect condition. Pay particular attention to the chain, wheels, 

drawbar, chassis, control unit, mast, battery, etc.

• Do not use on very dirty floors or in explosive environments.

• Only use on level ground. Do not work on slopes.

• Do not transport persons on the forks.

• When lifting the forks, make sure that nobody stands or walks under the forks.

• Wear gloves when using the forks.

• Do not move the truck when the goods are lifted to a height above 300 mm.

• When transport/lifting goods, keep a safety distance of 600 mm between all persons.

• Always distribute the weight of the goods equally between both forks. Never use only one fork. The centre of gravity of 

the goods should be in the middle of the two forks.

• Observe the goods during transport. If the goods become unstable and threaten to fall/tilt, stop operation immediately 

with the emergency stop button. 

• Do not load beyond the maximum capacity.

• Operation must be carried out with at least 50 lux lighting.

• Suitable for indoor operation at a room temperature b5°C and +40°C. 

• Carry out the maintenance work according to the regular inspection. 

• The battery should be charged in a dry and ventilated place and away from open fire.

 

GENERAL

Summary of Contents for HE1200/3

























Reviews: