U
SER
M
ANUAL
M
ARCH
2017
SolidRun Ltd
www.solid-run.com
Page 19 of 22
7 HaMada Street, Yokne’am Illit, Israel
Never use the adapter or power supply if the power cable is damaged. Check the power cable on a regular
basis to ensure that it is in proper operating condition. By taking appropriate safety measures and
carefully laying the power cable, you can ensure that the cable will not be damaged and that no one
can be hurt by, for example, tripping over the cable or suffering an electric shock.
Do not insert the plug into sockets that are dusty or dirty. Insert the plug firmly and all the way into the
socket. Otherwise, sparks that result in fire and/or injuries may occur.
Do not overload any sockets, extension cords or connector strips; doing so can cause fire or electric
shocks.
Do not insert or remove the plug with wet hands.
Never remove the cover or any part of the housing of the adapter or power supply, doing so will expose
circuits and components and can lead to electric shock, injuries, fire or damage to the product.
The adapter or power supply operating ambient temperature range is of 0 to 40°C / 32 to 104 °F (storage
temp range: -20 to 60
℃
/ -04 to 140 °F ) maximum operating altitude is 2000 m ASL,
Use suitable overvoltage protection to ensure that no overvoltage (such as that caused by a bolt of
lightning) can reach the product. Otherwise, the person operating the product will be exposed to the
danger of an electric shock.
The product is not liquid-proof; therefore, the equipment must be protected against penetration by
liquids. If the necessary precautions are not taken, the user may suffer electric shock or the product
itself may be damaged, which can also lead to personal injury.
Never use the product under conditions in which condensation has formed or can form in or on the
product, e.g. if the product has been moved from a cold to a warm environment. Penetration by water
increases the risk of electric shock.
Prior to cleaning the product, disconnect it completely from the power supply. Use a soft, non-linting cloth
to clean the product. Never use chemical cleaning agents such as alcohol, acetone or diluents for
cellulose lacquers.
Summary of Contents for ClearFog
Page 1: ...ClearFog Base User Manual...
