Heat Pump For Heating And Cooling Series
18
7.2.9 ON/OFF timer setting
With this function, the heat pump can turn on or
turn off automatically at the set time.
When the time point of “Timer on” is arrived, the
heat pump starts; thereafter, the “on/off” could be
controlled automatically based on the setting
temperature.
When the time point of “Timer off” is arrived, the
heat pump is shut down; subsequently, the machine
could no longer be controlled automatically based on
the setting temperature; it will be restarted until the
next time point of “Timer on” is arrived or the key is
pressed.
Totally 2 ON/OFF timers can be set. And they can
be applied to use for every day or only one day. In
timer setting status, the figure below NO represents
the timer sequence. If it shows “--:---“ on bottom, it
means timer invalid.
Below examples show how to set the heat pump
to switch on at 18:10 and switch off at 10:07.
If you want to use the function of “Timer on/Timer off”,
the system time
has to be detected whether it is correct in advance.
The setting method is referred to “Clock setting”.
ON or OFF state
Timer 1 focus
1
ON
1
Hour
of Timer 1
focus(ON)
℃
℃
℃
℃
℃
℃
Adjust
hour
Minute
of
Timer 1
focus(ON)
Adjust
minute
Hour of Timer 1
focus(OFF)
OFF
ON
1
ON
1
ON
1
1
℃
℃
℃
℃
℃
℃
℃
℃
Adjust
hour
Minute of Timer 1
focus(OFF)
OFF
1
OFF
1
℃
℃
℃
℃
