- 2 -
PC Interface Cable
Getting Started
1. Download the latest version of Solinst Levelogger
and
install the software on your PC.
LevelVent 5
Logger
Vented
Cable
LevelVent
Wellhead
Line up the socket and pin. Gently push the Wellhead and
Vented Cable together and twist slightly until you feel/
hear a
small click
when the properly aligned connection
is made.
Only tighten the stainless steel coupling
while holding
the Wellhead and Vented Cable still. Tighten the coupling
until it seats.
Do not twist the Vented Cable or
Wellhead.
Follow the same procedure when connecting the logger to
the Vented Cable.
3. Connect the USB PC Interface Cable to the top of the
LevelVent Wellhead. Plug the PC Interface Cable into your
computer.
2. Connect the LevelVent Wellhead and logger to the
Vented Cable:
Vented Cable
alignment
socket
Wellhead and logger
alignment
pin
Only Turn
Coupling
Hold Vented
Cable Still
Hold
Wellhead
Still
Serial Number
on Connector
for reference at
Wellhead
