Remote Radio Link User Guide
Page 6
Figure 2-5 Connecting Leveloggers
Reader Cable
Direct Read Cable
Levelogger
Figure 2-4 Reader Cable
(pt# 109428)
2.2.2 Connecting LevelVent Dataloggers
LevelVent dataloggers are connected to the station using a Reader Cable, which connects directly to a LevelVent
Wellhead (which is connected to the LevelVent Vented Cable and Datalogger).
Note:
For more information on installing LevelVent dataloggers in the field, see the Vented Dataloggers User Guide.
Figure 2-6 Connecting LevelVent Dataloggers
LevelVent Wellhead
Reader Cable
Vented Cable
2.2 Connecting Dataloggers and Splitters
There are two connections for dataloggers on each RRL Station using
Reader Cables. To connect the Reader Cables to the RRL Station,
remove the black dust cap from the connection on the RRL Station,
line up the holes in the connectors, push the Reader Cable connector
into the connection on the RRL Station and screw the Reader Cable
onto the RRL connection until finger-tight.
2.2.1 Connecting Leveloggers
Leveloggers are connected to the station using a Reader Cable, which connects to a Direct Read Cable
threaded onto the Levelogger.
Note:
For more information on installing Leveloggers in the field, see the Levelogger User Guide.
Summary of Contents for Remote Radio Link
Page 1: ...Solinst Remote Radio Link RRL User Guide November 6 2018...
Page 51: ......
