Remote Radio Link User Guide
Page 15
Step 4: Programming Your RRL Station
In Step 4, enter the serial number of the RRL Station you are programming; the Location of the Station, i.e.:
“Home Station”, “Well 1”, “Relay Station 2”; the Com Port being used to program the RRL Station; and the
Sample Rate for that station (if different from the one set in Step 2).
If you are programming the Home Station, you will select whether there is a datalogger connected to the
station. If there is not, you will skip to Step 6. If there is a datalogger connected, or you are programming a
Remote Station, you will proceed to Step 5.
Figure 4-7 Programming a RRL Station
Summary of Contents for Remote Radio Link
Page 1: ...Solinst Remote Radio Link RRL User Guide November 6 2018...
Page 51: ......
