Remote Radio Link User Guide
Page 24
Step 7: RRL Network Configuration Summary
After all settings have been programmed for each RRL Station in the network, Step 7 will display a summary
of all the settings. You can print a copy of this summary for your records.
Selecting ‘Finished’ will open the STS Administrator window and start the Communication Agent.
Figure 4-16 RRL Network Configuration Summary
Figure 4-17 RRL Network in Administrator Window
Note:
Once all stations have been programmed, it is recommended you start each station logging as a test in the
office. This can be done using the Remote Utility (see Section 5). After each station is started, and has contacted
the Home Station, the serial numbers and types of dataloggers connected to the station will be shown in the
Administrator Window. You can print a copy of this screen for each station as a record, and refer to it when installing
your stations in the field.
Summary of Contents for Remote Radio Link
Page 1: ...Solinst Remote Radio Link RRL User Guide November 6 2018...
Page 51: ......