Remote Radio Link User Guide
Page 32
Figure 5-2 Home Station Communication Test
The Remote Utility has the following functions:
• Radio Communication Test:
Click “Radio Test” to initiate the test. If the communication between
the RRL Station and the Home Station is successful, the “Home Station Communication Test
Passed” message will be shown.
Note:
The Radio Communication Test is a convenient tool when determining the final location of you
Remote Station in the field and the proper Radio Power setting for that station.
• Start Logging
: If the RRL Station is in idle mode “Start” will be displayed in the Remote Utility
main menu. To start logging, click “Start”, and “Stop” will then be displayed to indicate that the
RRL Station is in logging mode.
• Stop Logging
: If the RRL Station is in logging mode “Stop” will be displayed in the Remote
Utility main menu. To stop logging, click “Stop”. A message “Data Logging and Reporting will be
terminated. Do you want to continue?” will be shown. Click Yes to continue. “Start” will be
displayed to indicate that the RRL Station is in idle mode.
Figure 5-3 Datalogger Communication Test
• Datalogger Communication Test
: Click the Test button beside the datalogger image to initiate
the test. If the communication is successful, the “Probe Communication Test Passed” message will
be shown.
Summary of Contents for Remote Radio Link
Page 1: ...Solinst Remote Radio Link RRL User Guide November 6 2018...
Page 51: ......
