7. Troubleshooting
Note:
Never use any solvents, abrasives, or corrosive materials to clean the inverter.
CAUTION:
Do not touch the surface when the inverter is operating. Some parts may be
hot and could cause burns. Turn OFF the inverter (refer to Section 6.2) and
let it cool down before you do any maintenance or cleaning of inverter.
The LCD and the LED status indicator lights can be cleaned with cloth if they are too dirty
to be read.
Solis RHI Series inverter does not require any regular maintenance. However, cleaning the
heatsink will help the inverter dissipate heat and increase the lifetime of inverter. The dirt on the
inverter can be cleaned with a soft brush.
The inverter has been designed in accordance with international grid-tied standards for
safety and electromagnetic compatibility requirements. Before being delivered to the
customer the inverter is subjected to several tests to ensure reliability operation and reliability.
In case of a failure the LCD screen will display an alarm message. In this case, the inverter
may stop feeding energy into the grid. The alarm descriptions and their corresponding
alarm messages are listed in Table 7.1:
.60.
.61.
7. Troubleshooting
KWH
2
.
526
When faults occur, the “Fault” state will be shown on the main screen.
Follow the steps below to determine which fault has occurred.
Steps: Enter
→
Down
→
Advanced Information
→
Enter
→
Alarm Message.
Step1: Press ENTER.
Step2: Press DOWN to select Advanced Information, then press ENTER.
Settings
Menu
2015-02-23 19 35
Information
Settings
Advanced Information
Advanced Settings
COM
OK
