CIE-H12 User Manual Ver. 1.9
- 10 -
http://www.ezTCP.com
1.6.2 Output Ports
Figure 1-8 the output port (the front view)
The port 5 and 6 (OUTPUT) is output port and this port is interfaced with a relay (Normal
Open) as shown below.
Figure 1-9 a circuit diagram of the output port
The output port operates as in the following
Value
Relay contact
0
OFF (open)
1
ON (short)
Table 1-4 values of the output port
The allowed output ports’ electrical current of voltage conditions are as in the following:
Voltage Condition
Allowed current
DC28V
5A
Table 1-5 voltage conditions of the output port
Use a (-) shaped screwdriver to connect it with users’ devices since the output ports
are interfaced with a 3.5mm terminal block,
CIE-H12 is most appropriate for switching devices in lower voltage conditions than that.
Or High capacity relay is recommended.
