CIE-H12 User Manual Ver. 1.9
- 8 -
http://www.ezTCP.com
1.6
Interface
1.6.1 Input Ports
CIE-H12 has two input ports and the each has different type with the other. The one is a
“DRY CONTACT” type and the other one is a “WET CONTACT.”
Figure 1-4 input ports (the front view)
In the front panel, the DRY IN(0) port is the dry contact type and the WET IN(1) port is
the wet contact type.
The switch input type (Dry contact)
The first input port is a dry contact type so you can give the input signal by a switch.
Basically, this port is the same with the port WET IN(1) but has additional part for dry
contact. Just use a switch for giving signal to this port.
Figure 1-5 the dry contact input port
