P5H-155 User Manual > Layout
2021-12-10
Sollae Systems
page 6 of 13
Normal Open
It means that the output port default is OFF. This method can be used by connecting user
equipment to COM terminal and NO terminal of each output port. The maximum allowable current
is 5A at DC 30V.
Normal Close
It means that the output port default status is ON. This method can be used by connecting user
equipment to COM terminal and NC terminal of each output port. The maximum allowable current is
1A at DC 30V.
4. LED
This product has 8 LEDs. The user-defined LEDs are turned on when you output LOW to the UIO pin
connected.
Lable
Color
Description
UIO pin
PWR
Red
System LED - power supplying status
-
STS
Yellow
System LED - system status
-
A
Green
User-defined LED
UIO0.30
B
Green
User-defined LED
UIO0.31
Do0
Green
System LED - status of input port #0
UIO0.0
Do1
Green
System LED - status of input port #1
UIO0.1
RJ45_G
Green
System LED - network link status
-
RJ45_Y
Yellow
System LED - system status
-
5. Function Button
The function button, which is inside the hole of the side panel, is used to operate this product as a
button setup mode.
6. USB Device Port for connection with PC
The USB device port is to connect with PC. You can access to P5H-155 via development tool by
connecting USB cable to this port.