Product view and charging
R
Solmeta geotagger
Pro
4
Power Button (Press down the button for 2 seconds to turn the device on or off )
Enter-button (Short press to confirm your select)
Menu-button (Short press for change & select function)
Charging and data communication port
Charging
1. Turn off the device.
2. Use the supplied USB cable to connect the device to a computer, car charger or AC adaptor with a
USB
port. (The Geotagger Pro can be charged using any USB port that provides the standard 5 volts).
3. The device should be fully charged in about three hours. The battery indicator in the LCD will show
you the internal battery’s current level of charge.
4. When the battery is full, disconnect the Pro from the computer, car charger or AC adaptor.
Note
The internal rechargeable battery cannot be replaced by users; If it should ever need replacing, it
needs
to be done by a professional service technician.
ENTER
MENU
USB Port