7-9
Brakes
Topping up the brake fluid
Only use new fluid from an airtight
container. Fluid from open containers or
fluid previously bled from the system will have absorbed
moisture, which will adversely affect performance, and must
not be used.
Brake fluid will damage painted surfaces
and can cause body panels to crack. Soak
up any spillage with an absorbent cloth immediately and wash
the area with a mixture of car shampoo and water.
1. Open the hood. See
2. Clean the reservoir cap with a clean, dry cloth before
removing to prevent dirt or moisture from entering the
reservoir.
3. Position an absorbent cloth around the reservoir to absorb
any brake fluid spillage.
4. Remove the reservoir cap by turning it counterclockwise
(left).
5. Fill the reservoir with an approved brake fluid until the fluid
level is at the
MAX
fill mark.
6. Replace the reservoir cap and remove the cloth.
WARNING
CAUTION
Summary of Contents for TOC-1
