Operation
After installation of the Ratchet the Jammer can be utilised as required. Press down the metal lever
on the Jammer and slide it securely into the Ratchet. Once inserted, the Jammer can be smoothly
moved along the Ratchet as required by simply pressing down on the metal lever again, including
for complete removal.
NOTE:
the Jammer can be inserted from either the flat or round end of the Ratchet, but the metal
lever must always be facing the grooves on the Ratchet. If not, no locking or restricting is possible.
If positioned accurately, securing the Jammer at the closest point to the flat end (until you hear a
click) should result in your entry point being completely locked against opening.
From here, clicking and sliding the Jammer along the ratchet will allow your entry point to be
partially opened, but still secured.
To allow full access to your entry point, click and slide the Jammer out of the Ratchet entirely.
Utilise the Jammer holder for safekeeping and quick redeployment.
Removal
The Slide Jammer is designed to stay strongly in place in the face of external force and it not de-
signed to be removed and redeplolyed.
Should you need to remove the unit we recommend the use of garden or fishing wire, ideally
whilst wearing gloves. Remove the Jammer and simply manoeuvre the wire underneath the
Ratchet from the flat end, pulling along the length until the Ratchet prises away from the surface.
You may notice some adhesive residue remaining on the surface; this is normal for adhesive pads
and can be washed away utilising warm water and an appropriate cleaning agent if required.
Care and maintenance
Avoid moving the Jammer up and down the Ratchet without first pressing the metal lever, this can
cause damage to both the Ratchet and the mechanism.
During regular use you may notice some grey flecks appear on the Ratchet. This is simply residue
on the white paint from the bottom of the Jammer; this is normal and can be wiped off with either
a wet or dry wipe.
The provided cleaning wipes are Ethyl Alcohol based and, as a precaution, should be kept away
from children.
Though skin contact is not hazardous, it is recommended you wash your hands thoroughly with
warm water after use and seek medical assistance in the event any irritation occurs.
Solon Security
Unit 40
Manor Industrial Estate
Flint, Flintshire
CH6 5UY
solonsecurity.co.uk
FS 565100 EMS 655345
Industry leaders in quality
