29
SLS-ENVR Series NVR V2.1 User Manual
SECTION 2: INSTALLATION AND SETUP
ii.
The
From
and
To
fields define the start time and end time when recording will occur on the “Day” selected
previously. The To and From fields are in the format HH:MM:SS in 24-hour notation (00:00:00 to 23:59:59). Edit
these fields as needed.
c. Click the
Add Period
icon again to enter an additional time segment if needed.
3. Click the
Create
button to save the schedule. Notice that the new schedule is shown in the list in the left frame.
Note
: you can
edit the default preset schedules.
4. Click
Devices
in the left frame, then, in the right pane, click the
Device Status
button.
5. Check the device select box to the left of the IP address of the camera you want to record, then click the
Video
tab in the frame
below.
Device select box
Video tab
a. In the Video tab, click the
Add Recording Mode
icon to configure a scheduled recording mode.
b. Open the drop-down list to the right of
When to record
, then select the schedule you prefer.
c. Open the drop-down list to the right of
Recording type
, then select either
Off
,
On Trigger
, or
Permanent
(continuous when scheduled).
PRELIMINARY
Summary of Contents for SLS-ENVR Series
Page 6: ...vi NOTES PRELIMINARY...
