Solt SP7-100, User Manual

10

11

 (1) New bell ID registration (Available number of calling bell registration: about 900)

New bell ID registration

③  Enter into                 Mode using SET button.

④ When calling bell that is to be registered as No.1 is pressed, 
    it is registered with 'beep' sound.  Number of cursor location 
    is changed to '2', and when calling bell that is to be registered
    as No.2 is pressed, it is registered.  
   Thus each time next calling bell is pressed in order, sequential
   registration is made from No.1.

(④-1) If you want to change to other characters, refer to following table. 

⑤ When you press SET button for more than 2 seconds, 
    registration is completed and returns to previous stage.

⑥ When pressing SET button for more than 2 seconds, 
    it returns to previous stage. 

Character 

Change

 When character inversion is made by pressing SET button, you can select
 other characters using arrow keys.
  
    [Character Inversion]      
                                                         ▶

When you press MODE button for more than 2 seconds, you can select 
<Numbers, English Lower Case Letters, English Capital Letters, Special Characters>.

Digit Loca-

tion Shift

(Cursor 

Movement)

You can move cursor location using arrow keys. 

Registered total number of calling bells. 

※ Expressible Characters

Numbers

English Letters

(Lower case letters)

English Letters

(Capital Letters)

Special Characters

(Blank)

⑦ When you press MODE button for more than 2 seconds, 
    idle screen is displayed.

② After moving to      using arrow keys, enter into setting mode
    by pressing SET button.

① You can enter into Setting Mode by pressing MODE button 
    for more than 2 seconds at idle screen.