08
09
05
Installation and Wiring Compliance
06
Mounting Accessories
1. Installation and wiring must comply with the State and National
Electrical Codes.
2. The Sunlike 30W Pro model is intended for outdoor use only
and should not be installed in an unventilated area, and shall be
installed in an environment within the operational temperatures
defined for the product.
3. The average sunshine in the installation area should be above
3.5 hours/day in order to ensure full function of the lighting fixture.
Avoid areas with shades.
4. Before installation, if applicable, please ensure the light pole and its
foundation are solid enough to withstand the lighting fixture(s).
5. Before installation, please ensure that the battery is fully charged. Install
during sunny days if possible.
6. Before installation, please press the ON/OFF key in the remote
control and check whether it shows a red light on the indicator.
Please cover the panel and check if the light module turns on normally
within 1 minute.
After Installation
The lighting fixture will automatically turn on at night and turn off
during daylight.
Important
Always orient the solar panel facing the equator (e.g. facing south if in
northern hemisphere).
Always have a tilt angle of at least 15° to avoid dust accumulation
(0°=horizontal plane).
A. TRUNNION
—Wall Mount
C. TRUNNION
—Square
D. SLIP FITTER
—Rotative
AND STRAIGHT ARM
3.9 inches
6.7 inches
0.4 in
0.9 in
0.4 in
A-b. STLSTC-TRS-30W Pro (for Sunlike 30W Pro)
Pole Size For Slip Fitter And Straight Arm
1.8 inches
2.4 inches
3.9 inches
6.7 inches
0.4 in
0.9 in
0.4 in
B-b. STLSTC-TRR-30W Pro (for Sunlike 30W Pro)
works with 2.0 inches to 4.7 inches poles.
Pole Size
2.0 inches
4.7 inches
3.9 inch
6.7 inch
0.4 in
0.9 in
0.4 in
C-b. SLSTC-TRS-30W Pro (for Sunlike 30W Pro)
works with 2.0 inches to 4.0 inches poles.
Pole Size
2.0 inches
4.0 inches
Ordering Information Chart
Sample Number: STLSTC30XYYZZPRO
For example: STLSTC303TRSGYPRO
This means the customer wants a Sunlike Pro 30 watt, 3000K CCT,
wall mount installation, with a gray finish.
DO NOT
send the sample number directly to our salers. Use the
information in the chart above to create a model number with
the correct series, wattage, temperature, mounting option, and finish
for the product that you want.
Series
Wattage
Color
Temperature
Mounting
Options
Finish
STLSTC
=Sunlike Pro
30
=30W 6000 Lumens
X=3
=3000K
X=4
=4000K
X=5
=5000K
X=6
=5700K
YY=WM
=Wall Mount
YY=TRR
=Trunnion Round
YY=TRS
=Trunnion Square
YY=SF
=Slip Fitter
YY=SA
=Straight Arm
ZZ=GY
=Gray
ZZ=BZ
=Bronze
