Use 3-pin male XLR connectors.
CONNECTOR
Unbalanced line may also be used but may result in noise over
long cable runs.
Balanced input connector wire instructions These cables can be used in balance and imbalance
forward unbalanced input and output signal.
For an explanation of polarity connection such as the right: The balance of the connector for
each card nong output; Use the connectors can be used to connected to the input end of the
power amplifier.
Note: balance card nong can also be used in unbalanced connector is used, but must be 3 feet
vacancy, shell are connected to the earthing terminal 1 foot, when using balance connector,
three-terminal (stereo) connection, must be in the correct way of connection, keep the feet
connected correctly and to determine ground in safe and reliable.Incorrect connection may
result in about 6 db signal loss.
The connection to note:
1.Before connecting, please dispatch the volume control to a minimum
2
.
Make sure the power supply voltage is in accordance with the requirements
by this machine, then connect the power plug
Operation
Manual
P
age 09
Ethernet
230Vac 60HZ
ON
PROFESSIONAL DIGITAL AUDIO PROCESSOR
