6
Check the motor for plastic shipping
stabilizer tabs (1), and remove them if
they are present. Attach blade assem-
bly to motor using the noise-dampening
motor gaskets (2) and motor screws
provided. Tighten screws ecurely.
NOTE: Some models do not utilize
motor gaskets, washers, or stabilizer
tabs.
1
2
2
BLADE INSTALLATION
1.
2.
3.
Always ensure that fan is set to "OFF"
and blades are still prior to changing
directions. Reverse switch on fan
should ideally be set on "FORWARD"
(DOWN position) during hot seasons to
move blades in an anticlockwise direc-
tion & "REVERSE" (UP position) in
cold seasons to make the fan rotate in
clockwise direction.
Attach blade brackets to blades using
the blade bracket screws (1), metal
washers (2), and fabric washers (3), if
provided. NOTE: Some models do not
utilize fabric washers (3).
The blade brackets must be attached
to blade before attaching to motor. BE
CAUTION the blade brackets not be
deformed during installation to avoid
fan wobble or noise.