Page 4 of 9
3118.B
OPERATING INSTRUCTIONS
A.
Drape solution warmer with O.R. Solutions, Inc. warmer drape. Make
sure power switch is OFF before draping.
B.
Pour solution into drape, making sure that minimum fluid requirements
are maintained.
C.
Adjust drape to ensure uniform contact with the basin walls i.e. no air
pockets or folds.
D.
Depress POWER switch to turn machine on.
E.
To select temperature:
Step 1.
Press index.
Step 2.
Adjust set temperature to desired setting using up/down
arrows
Step 3.
Press enter.
Step 4.
Press index.
F.
Depress POWER switch to turn machine off. (Do not turn off by pulling
power cord from outlet.)
G.
Discard solution and drape per hospital guidelines.
NOTES:
NEVER TURN SOLUTION WARMER ON BEFORE MINIMUM
FLUID REQUIREMENT IS POURED INTO THE DRAPE.
DO NOT UNPLUG SOLUTION WARMER UNTIL POWER
SWITCH HAS BEEN TURNED OFF.
THE ORS-2000 SERIES SOLUTION WARMER IS PART OF A
WARMING SYSTEM THAT INCLUDES THE O.R.SOLUTIONS
®
WARMER DRAPE. O.R.SOLUTIONS
®
WARMER DRAPES MUST
BE USED WITH ALL ORS-2000 SERIES SOLUTION WARMERS
TO ENSURE OPTIMAL PERFORMANCE AND SAFETY.
