Manual FRAME-EVO-E10
Version 1.6
14.01.2019
Page
6
of
39
WARNINGS
Installation work should only be carried out by a qualified technician.
•
If this product is not installed correctly, serious accidents may result.
Do not use the FRAME-EVO-E10 frame outdoors.
•
This product is made only for indoor usage. If the FRAME-EVO-E10 frame is mounted
outdoor, there are many influences like wind or rain that can have an effect on the
stability of the whole system. This can cause serious accidents and property damage.
Do not place the frame on top of unstable surfaces.
•
If the frame is placed on top of a surface which is sloped or unstable, it may fall down
or tip over and injury or damage could result. Make sure that the surface can support
a load of 165 kg (363.76 lbs)
2
plus the weight of all additional equipment as well as
other potential systems.
Do not hang the frame from unstable or inappropriate structures.
•
If the frame is hung on an unstable structure, the entire system can fall down and
injuries may occur. Make sure that the construction can support a total weight of 165
kg (363.76 lbs) plus the weight of all additional equipment as well as other potential
systems.
Make sure to not exceed max. weight loads for ceiling mounting.
•
For suspended installations, use only designated hanging accessories, like TH-SHORT-
150-8, TH-SHORT-60-6, FRAME-PF-UNI-PORAD Portrait Adapter and FRAME-PF-UNI-
CLP5030, FRAME-PF-UNI-CLP30PT rigging clamps for a max. weight load of 165 kg
(363.76 lbs). Please refer to the corresponding instructions for the accessories used.
Please also refer to chapter “
2
165 kg (363.76 lbs) = 3 x (weight of heaviest pro weight of heaviest lens + weight of FRAME-EVO-E10)
