Manual FRAME-EVO-E20
Version 1.6
21.01.2019
Page
7
of
39
CAUTION
Before installing the projector in the FRAME-EVO-E20
frame, please read the projector’s
user manual. When the projector has a lens attached, please remove it.
•
The FRAME-EVO-E20 frame with the projector inside must be installed only in an
environment that is recommended by the projector manufacturer.
Minimum two persons are required to install the FRAME-EVO-E20 frame.
•
With regard to the overall weight of all necessary installation devices, make sure to
handle those with at least two people.
Make sure that the structure from which you hang up to 3 FRAME-EVO-E20 frames
including projectors is capable of carrying the overall weight of approx. 280 kg (617.29 lbs)
plus the weight of all additional equipment as well as other potential systems.
•
Prior to any installation, you must do a visual inspection to make sure that the
system is in a good condition. For more information please refer to chapter
12. System maintenance and inspection (Re-examination)
.