Manual FRAME-EVO-E20
Version 1.6
21.01.2019
Page
33
of
39
12. System maintenance and inspection (Re-examination)
The FRAME-EVO-E20 does not require special maintenance but a visual inspection must be
done
prior to every installation
in which the system is involved:
•
Before and after each installation, the
M8 and M10 mounting holes
must be
carefully inspected, as they may get damaged during the installation of the hanging
accessory.
•
Please carefully examine the M8 and M10 mounting holes by looking inside each one
of them and make sure the thread is not broken or damaged in any way.
•
Please make a visual inspection to be sure that all the screws are in the right place
and none are missing.
•
Make sure that the screws, nuts, stacking pins, connection rods, mounting plate and
all the components are not bended, damaged, or broken.
•
If any parts are broken or missing, please contact the seller so he can provide the
spare parts.
