SOLUXTEC GmbH
Page 4 of 10
2. Basic safety instructions
Risk of death by electric shock!
Solar modules create electricity and are
even energized under a slight illumination level. A series connection of modules leads
to an accumulation of voltage. A parallel connection addition leads to an
accumulation of current. The wiring of several modules to a generator control panel is
only to be handled by authorized specialized staff.
The network plug of the photovoltaic-panel has to be handled by a franchised certified
electrician.
During the assembly and handling of the photovoltaic-plant, all local legal norms,
technical building regulations and accident safety regulations, especially concerning
activity on the roof have to be kept.
The safety instructions of all plant components as well as all regulations of the
respective energy provider to the grid feeding operation of the PV-plant are to be
considered.
Also during low temperatures the maximum admissible Open circuit voltage of the
modules must not be exceeded.
Never open the junction box of the photovoltaic module.
Only use inspected safety equipment and tools for the installation.
Risk of death by electric arc!
The solar modules have to be disconnected
through DC switch
before the beginning of any
operation on any current-carrying
party of the photovoltaic-plant.
Do never disconnect the solar power generator from the inverter or the assembly of
the solar modules under load current. First turn off the DC switch.
Please protect the panel, plug and jack against damage or dirt contamination.
Do not establish a connection with dirty or wet plugs or jacks.
The tools that you use for the installation have to be dry.
Examine all tools for damage before the installation.
Do never introduce conductive parts in the connection box and joining pieces and
never try to touch the plugs on the inside.
Do not modify or decompose the solar panel. And do not remove any from the
manufacturer attached notices or type plates.
Avoid any contact of the PV-element with metal parts.
Pay attention to all warning notices and safety indication that are attached to the
panel.
The realized PV generator must not be perpetrated.
