SOLUXTEC GmbH
Page 5 of 10
3. Transport and stockage
During transport and interim storage the following point are to be observed:
The handling with the modules should always been handled with due care.
Any operation of the photovoltaic panel is to be made with clean and soft protective
gloves.
The modules are very shock-sensitive. During transport, charging and discharging,
store temporarily and disassembling and laying of the PV-elements therefore you
have to be extremely carefully with the handling. Never lay down the solar panels
rough or on the corners and use a correspondingly soft surface. Enter the modules
with both hands. Do not drop the modules.
Never use the junction box as a handle bar.
Pay attention on the low deflection.
For component storage use a dry, ventilated room.
Do not accumulate the photovoltaic panels.
Do not use the photovoltaic panels as a support.
Keep all parts clean, which may come in contact with the PV-element.
The modules are rated for practice in application class A: Dangerous voltage (IEC
61730: greater then 50Vdc; EN 61370: greater then 120Vdc); machines with
dangerous performance, where you can expect an absolute accessibility (Modules,
that are in this application class according to EN IEC 61730-1 and -2 qualified, you
can assume that they fulfill safety class II)
