SOLUXTEC GmbH
Page
7
of
14
version 1.4 - January 2014
4. Further advice for installation
Clamp installation must be used when installing modules
If different metals are used with the mounting system, pay attention to possible contact
corrosion due to different fastening material.
The clamps should not loom into the cell area of the module.
Do not use the junction box or wire head of the module to move the module..
Do not stand or step on the module.
Do not drop the module or let the object fall on the module.
In order to avoid broken glass of modules, do not place heavy objects on the modules.
Do not drop modules..
Improper transportation or installation may damage modules.
It is recommended to place the modules from minimum 10 cm from the ground.
It is recommended to use a torque wrench for installation.
It is recommended to keep the torque at 15-20 N.m when tightening (only stainless steel
M8 bolts can be used).
Stainless steel M8 nut
Aluminum splint
EPDM rubber gasket
Stainless steel T head M8 bolt
Summary of Contents for PowerSlate Mono Pure Glass Series
Page 8: ......