Version 1.0.15
16
Step 4-1.
For getting IP automatically if you are one of the users under 3.5G plus 11n Mobile
Server Router, please skip
Use the following IP address
and then select
Obtain an IP
address automatically
and
Obtain DNS server address automatically
and then click on
OK
button.
Step 4-2.
For getting IP manually in order to specify a Virtual Server, such as Print Server,
FTP Server and so on, please skip
Obtain an IP address automatically
and then select
Use
the following IP address
. And the following default setting of 3.5G plus 11n Mobile Server
Router should be noted:
IP Address: 192.168.1.10 (as your Print Server for example)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Note: If you configure your compute r’s IP Address manually, it needs to be on the same network segment.
For example:
IP Address: 192.168.1.xxx (xxx can be any number between 2 and 253, but it can’t be
repeated, we use 100 to be the example.)
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1 (this is the IP address of 3.5G plus 11n Mobile Server Router in
Router Mode)
DNS: 192.168.1.1 (use 3.5G plus 11n Mobile Server Router’s IP address or on your own
choice)
Note: IP address and Default gateway cannot be the same.
Summary of Contents for 3G11nMRW
