213
Version 1.0
Chapter 7 Q & A
7.1 Installation
1. Q: Where is the XDSL Router installed on the network?
A: In a typical environment, the Router is installed between the XDSL line and the LAN.
Plug the XDSL Router into the XDSL line on the wall and Ethernet port on the Hub
(switch or computer).
2. Q: Why does the throughput seem slow?
A: To achieve maximum throughput, verify that your cable doesn’t exceed 100 meter. If
you have to do so, we advise you to purchase a bridge to place it in the middle of the
route in order to keep the quality of transmitting signal. Out of this condition you
would better test something else.
Verify network traffic does not exceed 37% of bandwidth.
Check to see that the network does not exceed 10 broadcast messages per
second.
Verify network topology and configuration.
7.2 LED
1. Q: Why doesn’t 3.5G plus WLAN Mobile Server Router power up?
A: Check if the output voltage is suitable, or check if the power supply is out of order.
2. Q: The Internet browser still cannot find or connect to 3.5G plus WLAN Mobile
Server Router after verifying the IP address and LAN cable, the changes
cannot be made, or password is lost.
A: In case 3.5G plus WLAN Mobile Server Router is inaccessible, you can try to restore
its factory default settings. Please press the “Reset” button and keep it pressed over
7 seconds and the light of STATUS will vanish. The LEDs will flash again when reset
is successful.
3. Q: Why does 3.5G plus WLAN Mobile Server Router shut down unexpectedly?
Summary of Contents for 3GWIFIMRD
Page 1: ...Version 1 0 1 3GWIFIMRD 3 5G plus WLAN Desktop Server Router User Manual ...
Page 18: ...Version 1 0 18 If it can t work it will show Request timed out ...
Page 209: ...209 Version 1 0 ...
Page 212: ...212 Version 1 0 Step 9 Your hostname has been created when you see the following page ...