Solwise Ltd,
, sales@solwise.co.uk
Step 5: Next navigat
e to Advanced / Wireless Settings / Basic and this time set the `Wireless Mode’ as
`WDS Repeater’.
Under the `SSID II Security Settings’ section type the name of the SSID you set in the previous unit into the
`Root AP SSID’.
Under the `SSID I Security Se
ttings’ section type a suitable name in the `Network Name (SSID)’ box, this will
be the SSID for the second unit, and set the `Encryption Settings’ to disabled.
Once done, click `Apply’ to confirm the settings.
Now that both units are configured, plug the c
able back into the LAN port of the first unit’s POE injector and
connect to the second unit’s SSID to confirm both units are bridged and if successful the process is complete.
