41
4.6.
Deficiencies of components external to the Product that may affect its correct functioning, as
well as material or other damages (eg tiles, roofing, waterproofing, pipes, or personal injury) caused
by improper use of materials in the installation or by non-execution of the product installation in
accordance with the rules for the installation, applicable regulations or rules of good art, in particular
when the application of suitable piping to the temperature in use, expansion vessels, non-return
valves, safety valves , anti-condensation valves, among others;
4.7.
Products whose operation has been affected by failures or deficiencies of external components
or by poor sizing;
4.8.
Defects caused by the use of accessories or replacement components other than those
determined by Solzaima, S.A.;
4.9.
Defects arising from non-compliance with the installation, use and operation instructions or
applications not conforming to the intended use of the Product, or from abnormal climatic factors,
unusual operating conditions, overload or maintenance or cleaning performed improperly;
4.10. The Products that have been modified or manipulated by people outside the Official Technical
Services of the brand and consequently without the explicit authorization of Solzaima, SA.;
4.11. Damage caused by external agents (rodents, birds, spiders, etc.), atmospheric and / or
geological phenomena (earthquakes, storms, frost, hailstorms, thunderstorms, etc.), humid or saline
aggressive environments such as proximity of the sea or river, as well as those derived from excessive
water pressure, inadequate power supply (voltage with variations greater than 10%, with a nominal
value of 230V, or, neutral voltage greater than 5V, or absence of earth protection); pressure or supply
of inadequate circuits, acts of vandalism, urban confrontation and armed conflict of any kind, as well
as derivatives;
4.12. Failure to use the fuel recommended by the manufacturer is a condition of exclusion from the
Warranty.;
Explanatory note: In the case of pellet appliances the used fuel must be certified by EN 14961-2 grade
A1. Also, before buying large quantity you should test the fuel to see how it behaves. In wood
equipment, this moisture content must be of less than 20%.
4.13. The appearance of condensation, either by poor installation or by the use of non-virgin fuels
(such as pallets or wood impregnated with paints or varnishes, salt or other components), which may
contribute to the accelerated degradation of equipment and especially to your combustion chamber;
