Your Unit
Fig. 1
– Free Standing Fires M20 and M12-F.
Components
* The combustion chamber and casing of all our Free Standing Fires are
made of top-quality carbon steel plate with a thickness of 0.1 inches (5mm)
and 0.019 inches (1.5mm), respectively.
3
The M12-F model includes a
stainless steel oven with a gas exhaust duct connected to the flue;
* The front panel and ash grate are made of grey cast iron.
* Heat-resistant ceramic glass. Can withstand temperatures of up to
1382°F (750°C) in continuous use;
* Heat-resistant paint for temperature peaks up 1652°F (900°C) and
operating temperatures in the order 1112°F (600°C);
Installation
Attention: all regulations and standards must be complied with when
installing this unit.
1. Combustion air and gas circulation
*
This type of stove should be installed in well-ventilated areas. Any air
intake grilles should be placed in locations that are not liable to become
blocked;
3
The combustion chamber in models M20 and M30 has a thickness of 3mm.
M 20
(without forced ventilation)
Hot air outlet
Combustion air intake
regulator
Door handle
Smoke
outlet
M 12-F
(with forced ventilation)
Combustion air intake
regulator
Hot air outlet
Smoke outlet
Flue damper
Oven
Ventilators
7
8
