15
It should be checked that there is sufficient air circulation in the room where the
installation is carried out, otherwise the equipment will not work properly. For this
reason, it should be noted that there are other heating equipment that consumes air
for its operation (e.g. gas equipment, braziers, hoods, etc.), and that the operation of
these equipment is not recommended at the same time.
Pellet stoves are equipped with a probe to measure the ambient temperature. This
probe is attached to the grid at the back (Figure 9). For a better reading of the ambient
temperature, avoid contact of the probe end with the stove's body. If desired, you can
also attach it to the wall next to the machine.
Figure 9 – ambiente probe
8.
Remote
8.1.
IR Remote
Figure 10 – Infrared control
The infrared remote control allows the stove to be switched on and off and also
increases or decreases the airflow of the ambient fan and the power level of the
equipment.
8.2.
Remote control and display
ON
OFF
+
OK
MENU
MODE
ESC
-
MAN
AUT
20.5ºC
16:03
OFF
Figure 11 – Remote and display
Summary of Contents for K50
